E-mail: zx@pcb-smt.net
Tel: +86 755 26978081
Contact Us

Della Zhang






Factory address: 3/F. 1/B, 18-2 Yuquan East Rd. Yulv Village. Guangming New district. Shenzhen. China.

Medical Equipment Pcba

We have profuse experience in manufacturing PCB. Fastpcba PCB daily capacity is 1200 square meters, we can deliver the Single sided, Double sided PCB sample within 24 hours, 4-8 layer PCB in 3-5 working days,for the batch quantity for double side PCB,The lead time is 3-5 working days, 4-8 layers is 5-8 days. The quick and fast lead time stably ensures our customer of quick research speed to occupying the market. We have imported the advanced machinery from US,Japan,German and Israel to improve our production and technical ability.We have set a great example the PCB field of flying probe testing,buried and blind via and special controlled impedance.We have a highly developed R&D division which has helped our factory successfully produce mechanical micro via,high density impedance and HDI.

Send InquiryChat Now
Medical Equipment Pcba

Medical Equipment Pcba



PCB ESD Protection

ESD (Electro-Static discharge) came from the human body, environment and even electronic devices can cause various damage to sophisticated semiconductor chips, such as: penetrate the thin insulation layer inside the components. Damage the grid of MOSFET and CMOS components; Trigger lock in CMOS device; PN junction of short circuit reversal; Short circuit forward biased PN junction; Melt the welding line or aluminum wire inside the active device. To eliminate the interference and destruction of electronic devices by electrostatic discharge (ESD), various technical protections to be made.


During PCB design stage, PCB's anti-esd can be realized from layering, proper layout, installation and during production. Here are some common precautions:

1. Try to select multi-layer boards compared with double-sided PCB;

2. For double-sided PCB, choose tight interlaced power and ground grids;

3. Be sure that all the circuit be compact enough;

4. Try to layout as putting the components to one side;

5. Introduce the power cord from the center of the board if possible;

6. On all PCB layers below the connector that leads to the chassis, populate the wide chassis or polygonal filling and connect them through VIA at approximately 13mm space.

7. Put a ground wire to each signal to all those areas hit directly by ESD.

8. All I/O circuit be near related connectors.

9. Be sure that the signal wire as short as possible;

10. A ground wire to be created if the signal wire is longer than 300mm;

11. A high frequency bypass capacitance be hold for each 80mm connectors, etc.


FASTPCBA Technology Co.,Ltd is a competitive China Medical Equipment Pcba OEM manufacturer, supplier and vendor, you can get quick turn Medical Equipment Pcba production prototypes and samples from our factory.
Hot Tags: medical equipment pcb, supplier, manufacturer, factory, OEM manufacturer, vendor, samples, prototypes
Related Products
Leave Message
Your privacy is important to us - we never sell or share your information.